Body Armor Formed Front Bumper

Rock crawlers, mud boggers and desert rats all agree on one thing:  gear that comes stock on your Jeep just will not last when you are out off the highways.  It doesn’t matter if you are at Glamis tackling the dunes or if you are trying to articulate your way through the Moab, you always need to be prepared to rescue your rig.  When you make sure that your rig is equipped with one of the formed front bumpers that are made by Body Armor, you know that you will be ready to be able to pull your rig out of even the toughest of jams. 

These front bumpers have D ring tabs that are quite burly along with integrated shackle mounts and even a 2 inch receiver on certain models.  With features like that, you know that you will always be both ready and able to get your rig out of trouble as long as this bumper is on the front of it.  In addition, it also has a skid plate for the steering box (again, this depends on the model) that will protect those critical components when you are out there trying to tackle all of those boulders. 

As if all of that were not enough, this bumper has actually been built to be absolutely bulletproof.  The core of this bumper has been crafted from steel tubing and it has been welded on each end to enclose it.  The finish is a powder coat in black that is 4 mil thick.  This powder coat works not just to give it a more finished look but also to protect the bumper from things like fading, chipping and rust. 

This bumper also comes on a variety of styles.  Choose to go with the basic bumper or add things like welded hoops to it that will protect your headlights and grille.  This bumper is also easy to install as it just bolts on to your rig and you will only need basic hand tools to complete the installation. 

Features at a Glance

·         The Body Armor formed front bumper comes to you complete with a warranty that will cover manufacturer defects

·         The formed front bumper that is made by Body Armor has been given a 4 mil thick powder coat in black.  This makes the bumper look great while also protecting it from things like fading, rust and chipping

·         The formed front bumper that is brought to you by the minds at Body Armor comes to you complete with integrated light tabs

·         The Body Armor formed front bumper has available accessories such as hoops that will protect your headlights and grille

·         The formed front bumper by Body Armor features a skid plate that is quite heavy.  This skid plate is meant to protect your steering box.  Please note that some Jeep models will not be compatible with this skid plate

Body Armor Front Gen II Trail Doors complete with Black Nylon Webbing

The Gen II trail doors that are made by Body Armor will allow for you to shed some of that weight from your Jeep while you also gain visibility that is oh so critical on the trails.  With these doors, you will not need to be totally naked off road and you will be better protected than you are with no doors at all.  These doors will still allow for you to have 360º of visibility.

Features at a Glance

·         The Gen II Trail Doors complete with Black Nylon Webbing come to you pre-drilled for use with the 4 x 4 mirrors that are also made by Body Armor

·         The Gen II Trail Doors complete with Black Nylon Webbing that are brought to you by the minds at Body Armor come with additional padding that enhances their comfort

·         The Body Armor Gen II Trail Doors complete with Black Nylon Webbing have door inserts that are made from nylon webbing that has been woven.  This webbing will protect both you and your Jeep from the debris of the trail to a certain degree

·         The height of the Gen II Trail Doors complete with Black Nylon Webbing by Body Armor has been engineered to be comfortable

·         The Gen II Trail Doors complete with Black Nylon Webbing that are brought to you by the minds at Body Armor are sold in pairs

·         When you are installing the Body Armor Gen II Trail Doors complete with Black Nylon Webbing there is not a need to make any sort of modifications to the latch post

·         Installation of the Gen II Trail Doors complete with Black Nylon Webbing by Body Armor is absolutely simple.  All you have to do is take your stock doors off and slide the Gen II Trail Doors complete with Black Nylon Webbing into the hinges provided by the factory

·         The Gen II Trail Doors complete with Black Nylon Webbing that are brought to you by the minds at Body Armor feature an internal latch mechanism that is hidden.  This mechanism is exclusive to Body Armor and it has been designed to provide closure that is secure

·         Also exclusive to the Body Armor Gen II Trail Doors complete with Black Nylon Webbing are gusset plates that are made from steel plate.  These plates add both strength and style to the doors

·         The Gen II Trail Doors complete with Black Nylon Webbing by Body Armor have been finished with a powder coat in black that gives the doors a textured look while adding to their innate durability

·         The Gen II Trail Doors complete with Black Nylon Webbing that are brought to you by the minds at Body Armor are constructed from steel so that they will be sturdy enough to handle whatever perils that you put them to

Body Armor Front Skid Plate

This front skid plate that is made by Body Armor has been crafted from carbon steel that is 3/16 of an inch in thickness.  It has been engineered specifically to keep rocks and stumps from causing any sort of damage to your engine and front suspension.  

With this skid plate on your Jeep, you will not need to worry about any errant stumps or rocks sneaking under your bumper and taking out your oil pan, steering or front suspension.  This skid plate is a thick steel pan that will be positioned at an angle in order to deflect the rocks as opposed to smashing into them.  If you have a Jeep that is equipped with a sway bar disconnect that is electric then you will know just how pricey it can be to replace once it has been beaten by a branch or stump that the rest of your Jeep would have no problem rolling over.  In order to keep this expensive part safe, this skid plate has been augmented by a kick down plate that has been specifically designed for this purpose.  The entire skid plate has been given a textured powder coat in black so that it will coordinate with your Body Armor front bumper.

Features at a Glance

·         The Front Skid Plate by Body Armor has a kick down plate that is exclusive to the brand.  This plate is meant to offer protection to your sway bar disconnect that is electric

·         The Front Skid Plate that is brought to you by the minds at Body Armor has been given a textured powder coat finish in black.  This finish is durable and matches the finish of the Body Armor front bumpers.  It will protect the skid plate from things like fading, chipping and rust

·         The Body Armor Front Skid Plate has been formed from plate steel that has a thickness of 3/16 of an inch

Wrap Tail Light Guards

When you are out on the trail, it isn’t just the undercarriage of your Jeep that needs protection.  Your tail lights will also need to be protected or thy can be smashed easily by branches.  These tail light guards are made from tubular steel and they are easily installed in just a matter of minutes.

Features at a Glance

·         The Wrap Tail Light Guards that are made by Body Armor will add a more rugged look to your Jeep

·         The Wrap Tail Light Guards that are brought to you by the minds at Body Armor will give your tail lights the protection that they need from things like branches and brush on the trails

·         The Body Armor Wrap Tail Light Guards have been formed from tubular steel.  They are lightweight yet super strong

·         The Wrap Tail Light Guards that are made by Body Armor have been given a textured powder coat finish in black to make them look good but also to protect them from things like fading, chipping and rust

Body Armor High Clearance Front Bumper

Whether you are a rock crawler, you love to play in the mud or you like to spend your free time traversing the desert, off roaders all have the same feeling about their factory installed parts: they just can’t cut it when they are off road.  No matter where you are when you are on your off road jaunts, you need to be able to rescue yourself when you get stuck.  Many times you won’t have a cell signal and the nearest civilization will be miles away.  When you put one of the Body Armor High Clearance Front Bumpers on your rig, you will be ready and able to get yourself and your rig out of the toughest jams.

This bumper comes to you with D ring tabs that are quite burly as well as with shackle mounts that have been integrated into the bumper.  It also has a recovery receiver of 2 inches on certain models.  With features like these, you will be able to get yourself out of trouble with a quickness.  It also includes a skid plate that is meant to protect your steering box – again, on certain models.  This skid plate will protect those critical components leaving you free to worry about driving instead of worrying about your undercarriage.

This bumper was made to be bulletproof.  It has been crafted from steel tubing that is rectangular and it has been welded closed on each end.  This steel has been given a durable textured powder coat in black to make it look good but also to protect it from things like chipping, fading and rusting.

The High Clearance Front Bumper comes in a variety of styles.  You can start with just the standard base or you can decide to upgrade it with things like hoops that have been welded and are meant to provide protection to your headlights and your grille.  This bumper installs easily and requires the use of only the most basic of hand tools.  It does come with a warranty that protects against manufacturer defects.

Features at a Glance

·         The High Clearance Front Bumper by Body Armor has been custom made so that it will be a direct replacement for your factory installed bumper.  It bolts easily into place and doesn’t even require any cutting or drilling

·         The High Clearance Front Bumper that is brought to you by the minds at Body Armor features shackle mounts that have been welded on.  These shackle mounts are meant to be used in conjunction with D rings – these D rings are sold separately

·         The Body Armor High Clearance Front Bumper features a 2 inch receiver that has been integrated into the bumper so that you have even more options when it comes to recovery applications

Body Armor: Body Armor Full Kit

When you want a rugged, more off road look for your Jeep, you can get it easily with the Body Armor full kit made by Body Armor.  Each piece of this body armor has been made from a thermoplastic that has been heat treated and has the look of black diamond plate.  This will give your Jeep the toughest and coolest looking upgrade in minutes.  Each piece of this body armor attaches to your Jeep easily with double sided 3M tape that is super strong and will ensure a fit that is secure.  (There may be some drilling necessary for the front guard though)

If you happen to have a dent or a scratch in your paint then you can cover it with ease using this body armor.  All you need to do is fill in the dent or scratch with some touch up paint.  Now just install the body armor piece over it and now nobody will be able to tell that there used to be an imperfection there. 

With the full kit of body armor you will get the rear tailgate sill, a pair of rear corner covers, a pair of rocker side covers, the cover for the front frame, a pair of guards for the front fenders and the stone guard for the hood as well as the 3M tape.

Features at a Glance

·         The entire kit of body armor installs with ease using the included 3M tape.  Just peel and stick just as you would with the decals on a model car

·         The thermoplastic that is used to make the body armor has been UV treated

·         The thermoplastic that the armor is made from has been given a black diamond plate look

·         The full kit comes with a total of 9 pieces of armor: a stone guard for the hood, a pair of guards for the front fenders, the cover for the front frame, a pair of rocker side covers, a pair of rear corner covers and the tailgate seal as well as the 3M tape necessary for installation

·         This kit has been made for the Rubicon and TJ from 1997 – 2006 although there are also kits made for other models and years available

Body Armor knows that for the most hard core off roaders, there needs to be some hard core off road parts and accessories.  They build all of their products from bumpers to body armor to be strong enough for the toughest trail blazers, dune surfers and rock crawlers in the world.  Protect your Jeep from the hazards of the trail while giving it a more rugged look simply by installing the full kit of body armor made by Body Armor.

 

Body Armor: Body Armor Corner Guard

When you have a Jeep and take it off road, you know that it will encounter obstacles that just are not present on the highway.  For those who want to protect their Jeeps in any way that they can, there is body armor that is available.  This body armor is actually made from a thermoplastic that has been UV treated to be able to withstand sunlight without fading.  Even though this body armor is made from thermoplastic it is very strong and resilient.  It is also easy to install since all you need to do is attach the pieces to your Jeep with the included 3M tape that is not just super strong but it also double sided. 

Remember when you were a kid and you might have made some model cars?  Remember putting the decals on the cars?  That is exactly how these body armor pieces are attached to your Jeep.  See, you can protect your Jeep and reminisce about the old days all at the same time! 

Each piece of body armor that is made by Body Armor provides protection for the paint job on your Jeep.  At the same time, it upgrades the look of your Jeep.  The included 3M tape is automotive grade and will ensure that you get adhesion that is long lasting.  The corner pieces for the rear of your Jeep are custom made for your specific model and year.  They protect the rear corners of your Jeep while still allowing for the license plate to have its normal spot.

Features at a Glance

·         The corner guard pieces of body armor made by Body Armor come to you complete with the 3M tape that is automotive grade and double sided.  This is what you will use to attach the pieces to your Jeep

·         The corner guard body armor that is made by Body Armor comes to you in a black color

·         These body armor pieces are made from a very high tensile thermoplastic that has been given a UV treatment to allow it to be resistant to fading from the sun

·         This body armor is compatible with both 2 door Jeep models and 4 door models

·         These particular corner guards made by Body Armor have been made specifically for the Wrangler JK Unlimited as well as for the Rubicon Unlimited from 2007 – 2015 models

·         The corner guard pieces of body armor are so easy to install that from start to finish you can be done in less than 5 minutes

You can use these pieces to cover up imperfections in your paint job or just to protect it from getting scratched up while also giving your rig that off road look.

 

Body Armor Roof Rack Adapters

If you have a Jeep Wrangler 2007 – 2015 JK and a roof rack made by Body Armor then you might find a use for the roof rack adapters that they also make.  These roof rack adapters are sold in sets of two.  With these amazing adapters, you will have the ability to add some accessory cross bars on to your roof rack made by Body Armor.  These cross bars will then allow you to have the ability to add a variety of cargo accessories to the rack.  For example, you can add a bike rack to your rack if you wanted to.  All you need to do is just attach these roof rack adapters to your roof rack and then get some of the cargo cross bars made by Thule or Yakima to add and you will be all set.

Features at a Glance

·         Installation of these roof rack adapters does not involve any sort of drilling, welding or cutting.  That means that installation is quick and easy.

·         If you are going to use Thule accessories then you will also need to get the tracker II kit as well as  the foot pack

·         If you are going to use Yakima accessories then you will also need to get the landing pad and the control towers

·         That said, with the roof rack adapters made by Body Armor, you will be able to also use cross bars as well as accessories made by Yakima and/or Thule

·         Adapters will work along with any tube that has a diameter measuring 2 inches.  That includes some truck bed rails and even some roof racks made by other manufacturers

·         Adapters are incredibly versatile and can be placed anywhere along the sides of your Body Armor roof rack

·         These adapters are quite unique in that they were designed to be able to be used on nearly any tube that has a 2 inch diameter.  This includes any of the tubes on the base of the roof racks made by Body Armor

·         You will find these adapters come in pairs

·         The adapters have a 2 piece design and they will fit around the tubes where ever you need to place them

No arsenal of aftermarket roof rack products is complete without these roof rack adapters.  With these in your possession, you will have the ability to add all of the roof rack accessories that you need.  This includes bars for cargo boxes, canoe racks and even bike racks.  In addition, these are not just for Jeeps.  Any vehicle that can support a roof rack made by Body Armor can benefit from these adapters.

They are so easy to use too, just clamp them around the tubes and you are ready to upgrade your roof rack!