Body Armor Tail Light Guards

With these tail light guards that are made by Body Armor you will be able to protect your expensive lenses on your tail lights from brush and tree branches.  These tail light guards are made from tubular steel and are easily installed in just minutes.

Features at a Glance

·         The tail light guards that are made by Body Armor will give your Jeep a more rugged look

·         The tail light guards that are brought to you by the minds at Body Armor will protect the lenses of your tail lights from branches and brush

·         The Body Armor tail light guards are made from tubular steel that gives them strength while still allowing for them to be lightweight

·         The tail light guards that are made by Body Armor have been given a durable textured powder coat in black.  This coating doesn’t just make them look good, it also gives them resistance to things like chipping, fading and rusting

Your Jeep goes through hell when you are off road and this includes your tail lights.  The plastic lenses can be fragile and their location right at the corners of your rig means that they are in a perfect position to be scratched and even broken by underbrush and tree branches that are whipping by at high speeds.  You protect the paint and the bod of your Jeep with things like rock rails and aftermarket bumpers so why leave your tail lights unprotected?  In addition to adding protection to your tail lights, these tail light guards also give your rig a look that is more rugged.

Wrap Tail Light Guards by Body Armor

This is another offering by Body Armor in the tail light protection category.  These light guards will also protect your tail lights from being scratched and even broken by all of that underbrush and those tree branches that can cause it.  These Wrap Tail Light Guards are also easy to install and even the un-handiest of person can install them in minutes.

Features at a Glance

·         The Wrap Tail Light Guards that are made by Body Armor will add a look that is more rugged to your Jeep.  This is a great way to easily and cost effectively make your Jeep have a more custom look.

·         The Wrap Tail Light Guards that ae brought to you by the minds at Body Armor will give your tail lights more of the protection that they need from things like underbrush and tree branches when you are out on the trail. 

·         The Body Armor Wrap Tail Light Guards have been constructed from a tubular steel.  This particular type of steel is lightweight yet very strong.

·         The Wrap Tail Light Guards that are made by Body Armor have been given a powder coat in black.  This powder coat is durable and has a texture.   It will provide the Wrap Tail Light Guards with resistance to chipping, fading and rusting

Body Armor Roof Rack Base

The Roof Rack Base kits that are made by Body Armor have been fashioned from .120 wall steel tubing that has a diameter of 2 inches.  They feature not just one powder coat but two finishes in black that is textured.  The design is a simple one that is easily bolted together with the included hardware that is Grade 8.  It also comes with light bars for both the front and the rear.   This Roof Rack Base features not a single cross bar and has a unique design that allows for it to be compatible with the Cargo Basket that is also made by Body Armor.  This roof rack has been designed to be able to withstand the rigors of even the harshest of trails. 

With this new Roof Rack Base you will be able to retain the ability to be able to retract the soft top on your Jeep while the Roof Rack Base is still connected to the Jeep.  You will easily be able to take your Jeep hard top off even with the Roof Rack Base still attached. 

Jeeps are quite rugged and they are capable of traveling to places where most other types of vehicles would fear to go.  That being said, they are poorly lacking when it comes to space.  The answer to your cargo issues is a simple one.  This Roof Rack Base and Cargo Basket from Body Armor will give you a space to store your cargo that is tough enough to be worthy of a Jeep.

Features at a Glance

·         With the Roof Rack Base that is made by Body Armor you will be able to still retract your Jeep soft top with the base installed

·         The Roof Rack Base that is brought to you by the minds at Body Armor has been engineered and designed to be able to handle even the toughest of trails

·         The Body Armor Roof Rack Base has a unique design that allows for it to be compatible with the Cargo Basket that is also created by Body Armor

·         The Roof Rack Base that is made by Body Armor has not a single unsightly cross bar

·         The Roof Rack Base that is brought to you by the minds at Body Armor features a light bar in the front as well as a light bar in the rear

·         The Body Armor Roof Rack Base has a design that makes it easy to bolt together with the included hardware that is Grade 8

·         The Roof Rack Base that is made by Body Armor has a dual powder coat finish in black.  This finish is durable and textured.  It gives the rack a more stylish appearance while also giving it resistance to chipping, fading and rusting

·         The Roof Rack Base that is brought to you by the minds at Body Armor is made from .120 wall steel tubing that has a diameter of 2 inches

Body Armor Rear Bumper

When you are out exploring the countryside in your Jeep, the chances are very good that you will end up getting stuck in a spot that is a bit tight.  Since you would never dream of leaving your precious Jeep stuck out on the trails, and since you will more than likely be miles from civilization or even a cell signal, you will need to be prepared to get your Jeep unstuck all by your lonesome.  This is where the Rear Bumper that is made by Body Armor can be the difference between hoofing it back to civilization and driving back.  This bumper is burly and will give you an anchor that is solid for getting your Jeep back where it needs to be.

This bumper has been designed specifically for people who love to go rock crawling.  It has a solid construction that has been made from rectangular steel tubing.  The swing away models will also be equipped with shackles that are heavy duty and have been welded into place for when you need to attach a couple of D rings.  The models for the Jeep TJ, YJ and CJ also include a 2 inch hitch receiver that is perfect for when you are in a position that calls for a backwards recovery. 

For versatility off road that is unmatched, you can always upgrade the basic rear bumper by Body Armor with something called a Swing-A-Way package.  This package consists of a mount for a CB antenna, a mount for a J can and a mount for a Hi Lift jack all in one.  This kit also swings out for when you need access to the rear cargo area of your Jeep. 

Each one of the rear bumpers that is made by Body Armor has been custom made to deliver an installation that is simple.  All that you need to do is bolt it on and you are ready to go.  There is no need for any welding, cutting or drilling.  To top it all off, these bumpers are guaranteed to arrive with no manufacturer defects.

Features at a Glance

·         The Rear Bumper that is made by Body Armor comes to you complete with a warranty that covers any type of manufacturer defects

·         The Rear Bumper that is brought to you by the minds at Body Armor has been given a durable textured powder coat in black.  This coat is 4 mil thick and not only adds to the style of the bumper but it also makes it more resistant to things like chipping, fading and rusting

·         The Body Armor Rear Bumper has optional accessories such as the Swing-A-Way kit.  This kit will transform the Rear Bumper into a mount for a CB antenna, a J can, a Hi Lift jack and a spare tire

 

Body Armor Mirrors for Trail Doors

These mirrors for Trail doors are made by Body Armor just like the Trail doors are.  They are sold in sets of 2 and they will attach easily to the Trail doors.  These mirrors will allow for you to still be driving legally even when you have removed the factory installed doors – that are equipped with attached mirrors - from your Jeep.

Features at a Glance

·         The mirrors for Trail doors by Body Armor are sold in sets of two.  One for the driver side and one for the passenger side of the Jeep

·         The mirrors for Trail doors that are brought to you by the minds at Body Armor feature a function that allows for them to swing away when you get into tight spaces

·         The Body Armor mirrors for Trail doors mount directly to the holes that have been pre-drilled in the Trail doors

·         The mirrors for Trail doors that are made by Body Armor are available in black

When you take your factory installed doors off of your Jeep for activities such as rock crawling, you lose the mirrors as well as the doors.  While you may not need these mirrors out on the trails, you will find them necessary for driving your Jeep TO the trails…that is, if you don’t want to be stopped and fined for not having them.

Body Armor Trail Doors

The Trail doors that are made by Body Armor are made from steel tubing.  Well, the frame of them is at least.  This steel tubing has been given a durable textured powder coat finish in black so that they will be resistant to things like fading, chipping and rusting.  These doors have an internal latching system that is exclusive to Body Armor and has been designed to enable a closure that is secure.  The doors also feature steel pate gussets for additional style as well as strength.  Installation of these doors is incredibly easy since you just take the factory installed doors off and slide these doors right into the factory installed hinges.

Features at a Glance

·         The Trail doors that are made by Body Armor have been constructed from steel tubing.

·         The Trail doors that are brought to you by the minds at Body Armor have been given a durable textured powder coat in black.  This powder coat gives them resistance to things like chipping, fading and rusting

·         The Body Armor Trail doors feature steel plate gussets that are a feature exclusive to Body Armor.  These gusset plates give the doors more strength as well as more style.

·         The Trail doors that are made by Body Armor also feature an internal latch that is hidden.  This is yet another Body Armor exclusive.  This latch has been engineered to provide closure that is secure.

Body Armor Formed Front Bumper

Rock crawlers, mud boggers and desert rats all agree on one thing:  gear that comes stock on your Jeep just will not last when you are out off the highways.  It doesn’t matter if you are at Glamis tackling the dunes or if you are trying to articulate your way through the Moab, you always need to be prepared to rescue your rig.  When you make sure that your rig is equipped with one of the formed front bumpers that are made by Body Armor, you know that you will be ready to be able to pull your rig out of even the toughest of jams. 

These front bumpers have D ring tabs that are quite burly along with integrated shackle mounts and even a 2 inch receiver on certain models.  With features like that, you know that you will always be both ready and able to get your rig out of trouble as long as this bumper is on the front of it.  In addition, it also has a skid plate for the steering box (again, this depends on the model) that will protect those critical components when you are out there trying to tackle all of those boulders. 

As if all of that were not enough, this bumper has actually been built to be absolutely bulletproof.  The core of this bumper has been crafted from steel tubing and it has been welded on each end to enclose it.  The finish is a powder coat in black that is 4 mil thick.  This powder coat works not just to give it a more finished look but also to protect the bumper from things like fading, chipping and rust. 

This bumper also comes on a variety of styles.  Choose to go with the basic bumper or add things like welded hoops to it that will protect your headlights and grille.  This bumper is also easy to install as it just bolts on to your rig and you will only need basic hand tools to complete the installation. 

Features at a Glance

·         The Body Armor formed front bumper comes to you complete with a warranty that will cover manufacturer defects

·         The formed front bumper that is made by Body Armor has been given a 4 mil thick powder coat in black.  This makes the bumper look great while also protecting it from things like fading, rust and chipping

·         The formed front bumper that is brought to you by the minds at Body Armor comes to you complete with integrated light tabs

·         The Body Armor formed front bumper has available accessories such as hoops that will protect your headlights and grille

·         The formed front bumper by Body Armor features a skid plate that is quite heavy.  This skid plate is meant to protect your steering box.  Please note that some Jeep models will not be compatible with this skid plate

Body Armor Front Gen II Trail Doors complete with Black Nylon Webbing

The Gen II trail doors that are made by Body Armor will allow for you to shed some of that weight from your Jeep while you also gain visibility that is oh so critical on the trails.  With these doors, you will not need to be totally naked off road and you will be better protected than you are with no doors at all.  These doors will still allow for you to have 360º of visibility.

Features at a Glance

·         The Gen II Trail Doors complete with Black Nylon Webbing come to you pre-drilled for use with the 4 x 4 mirrors that are also made by Body Armor

·         The Gen II Trail Doors complete with Black Nylon Webbing that are brought to you by the minds at Body Armor come with additional padding that enhances their comfort

·         The Body Armor Gen II Trail Doors complete with Black Nylon Webbing have door inserts that are made from nylon webbing that has been woven.  This webbing will protect both you and your Jeep from the debris of the trail to a certain degree

·         The height of the Gen II Trail Doors complete with Black Nylon Webbing by Body Armor has been engineered to be comfortable

·         The Gen II Trail Doors complete with Black Nylon Webbing that are brought to you by the minds at Body Armor are sold in pairs

·         When you are installing the Body Armor Gen II Trail Doors complete with Black Nylon Webbing there is not a need to make any sort of modifications to the latch post

·         Installation of the Gen II Trail Doors complete with Black Nylon Webbing by Body Armor is absolutely simple.  All you have to do is take your stock doors off and slide the Gen II Trail Doors complete with Black Nylon Webbing into the hinges provided by the factory

·         The Gen II Trail Doors complete with Black Nylon Webbing that are brought to you by the minds at Body Armor feature an internal latch mechanism that is hidden.  This mechanism is exclusive to Body Armor and it has been designed to provide closure that is secure

·         Also exclusive to the Body Armor Gen II Trail Doors complete with Black Nylon Webbing are gusset plates that are made from steel plate.  These plates add both strength and style to the doors

·         The Gen II Trail Doors complete with Black Nylon Webbing by Body Armor have been finished with a powder coat in black that gives the doors a textured look while adding to their innate durability

·         The Gen II Trail Doors complete with Black Nylon Webbing that are brought to you by the minds at Body Armor are constructed from steel so that they will be sturdy enough to handle whatever perils that you put them to

Body Armor Front Skid Plate

This front skid plate that is made by Body Armor has been crafted from carbon steel that is 3/16 of an inch in thickness.  It has been engineered specifically to keep rocks and stumps from causing any sort of damage to your engine and front suspension.  

With this skid plate on your Jeep, you will not need to worry about any errant stumps or rocks sneaking under your bumper and taking out your oil pan, steering or front suspension.  This skid plate is a thick steel pan that will be positioned at an angle in order to deflect the rocks as opposed to smashing into them.  If you have a Jeep that is equipped with a sway bar disconnect that is electric then you will know just how pricey it can be to replace once it has been beaten by a branch or stump that the rest of your Jeep would have no problem rolling over.  In order to keep this expensive part safe, this skid plate has been augmented by a kick down plate that has been specifically designed for this purpose.  The entire skid plate has been given a textured powder coat in black so that it will coordinate with your Body Armor front bumper.

Features at a Glance

·         The Front Skid Plate by Body Armor has a kick down plate that is exclusive to the brand.  This plate is meant to offer protection to your sway bar disconnect that is electric

·         The Front Skid Plate that is brought to you by the minds at Body Armor has been given a textured powder coat finish in black.  This finish is durable and matches the finish of the Body Armor front bumpers.  It will protect the skid plate from things like fading, chipping and rust

·         The Body Armor Front Skid Plate has been formed from plate steel that has a thickness of 3/16 of an inch

Wrap Tail Light Guards

When you are out on the trail, it isn’t just the undercarriage of your Jeep that needs protection.  Your tail lights will also need to be protected or thy can be smashed easily by branches.  These tail light guards are made from tubular steel and they are easily installed in just a matter of minutes.

Features at a Glance

·         The Wrap Tail Light Guards that are made by Body Armor will add a more rugged look to your Jeep

·         The Wrap Tail Light Guards that are brought to you by the minds at Body Armor will give your tail lights the protection that they need from things like branches and brush on the trails

·         The Body Armor Wrap Tail Light Guards have been formed from tubular steel.  They are lightweight yet super strong

·         The Wrap Tail Light Guards that are made by Body Armor have been given a textured powder coat finish in black to make them look good but also to protect them from things like fading, chipping and rust

Body Armor High Clearance Front Bumper

Whether you are a rock crawler, you love to play in the mud or you like to spend your free time traversing the desert, off roaders all have the same feeling about their factory installed parts: they just can’t cut it when they are off road.  No matter where you are when you are on your off road jaunts, you need to be able to rescue yourself when you get stuck.  Many times you won’t have a cell signal and the nearest civilization will be miles away.  When you put one of the Body Armor High Clearance Front Bumpers on your rig, you will be ready and able to get yourself and your rig out of the toughest jams.

This bumper comes to you with D ring tabs that are quite burly as well as with shackle mounts that have been integrated into the bumper.  It also has a recovery receiver of 2 inches on certain models.  With features like these, you will be able to get yourself out of trouble with a quickness.  It also includes a skid plate that is meant to protect your steering box – again, on certain models.  This skid plate will protect those critical components leaving you free to worry about driving instead of worrying about your undercarriage.

This bumper was made to be bulletproof.  It has been crafted from steel tubing that is rectangular and it has been welded closed on each end.  This steel has been given a durable textured powder coat in black to make it look good but also to protect it from things like chipping, fading and rusting.

The High Clearance Front Bumper comes in a variety of styles.  You can start with just the standard base or you can decide to upgrade it with things like hoops that have been welded and are meant to provide protection to your headlights and your grille.  This bumper installs easily and requires the use of only the most basic of hand tools.  It does come with a warranty that protects against manufacturer defects.

Features at a Glance

·         The High Clearance Front Bumper by Body Armor has been custom made so that it will be a direct replacement for your factory installed bumper.  It bolts easily into place and doesn’t even require any cutting or drilling

·         The High Clearance Front Bumper that is brought to you by the minds at Body Armor features shackle mounts that have been welded on.  These shackle mounts are meant to be used in conjunction with D rings – these D rings are sold separately

·         The Body Armor High Clearance Front Bumper features a 2 inch receiver that has been integrated into the bumper so that you have even more options when it comes to recovery applications