Body Armor: Body Armor Full Kit

When you want a rugged, more off road look for your Jeep, you can get it easily with the Body Armor full kit made by Body Armor.  Each piece of this body armor has been made from a thermoplastic that has been heat treated and has the look of black diamond plate.  This will give your Jeep the toughest and coolest looking upgrade in minutes.  Each piece of this body armor attaches to your Jeep easily with double sided 3M tape that is super strong and will ensure a fit that is secure.  (There may be some drilling necessary for the front guard though)

If you happen to have a dent or a scratch in your paint then you can cover it with ease using this body armor.  All you need to do is fill in the dent or scratch with some touch up paint.  Now just install the body armor piece over it and now nobody will be able to tell that there used to be an imperfection there. 

With the full kit of body armor you will get the rear tailgate sill, a pair of rear corner covers, a pair of rocker side covers, the cover for the front frame, a pair of guards for the front fenders and the stone guard for the hood as well as the 3M tape.

Features at a Glance

·         The entire kit of body armor installs with ease using the included 3M tape.  Just peel and stick just as you would with the decals on a model car

·         The thermoplastic that is used to make the body armor has been UV treated

·         The thermoplastic that the armor is made from has been given a black diamond plate look

·         The full kit comes with a total of 9 pieces of armor: a stone guard for the hood, a pair of guards for the front fenders, the cover for the front frame, a pair of rocker side covers, a pair of rear corner covers and the tailgate seal as well as the 3M tape necessary for installation

·         This kit has been made for the Rubicon and TJ from 1997 – 2006 although there are also kits made for other models and years available

Body Armor knows that for the most hard core off roaders, there needs to be some hard core off road parts and accessories.  They build all of their products from bumpers to body armor to be strong enough for the toughest trail blazers, dune surfers and rock crawlers in the world.  Protect your Jeep from the hazards of the trail while giving it a more rugged look simply by installing the full kit of body armor made by Body Armor.

 

Body Armor: Body Armor Corner Guard

When you have a Jeep and take it off road, you know that it will encounter obstacles that just are not present on the highway.  For those who want to protect their Jeeps in any way that they can, there is body armor that is available.  This body armor is actually made from a thermoplastic that has been UV treated to be able to withstand sunlight without fading.  Even though this body armor is made from thermoplastic it is very strong and resilient.  It is also easy to install since all you need to do is attach the pieces to your Jeep with the included 3M tape that is not just super strong but it also double sided. 

Remember when you were a kid and you might have made some model cars?  Remember putting the decals on the cars?  That is exactly how these body armor pieces are attached to your Jeep.  See, you can protect your Jeep and reminisce about the old days all at the same time! 

Each piece of body armor that is made by Body Armor provides protection for the paint job on your Jeep.  At the same time, it upgrades the look of your Jeep.  The included 3M tape is automotive grade and will ensure that you get adhesion that is long lasting.  The corner pieces for the rear of your Jeep are custom made for your specific model and year.  They protect the rear corners of your Jeep while still allowing for the license plate to have its normal spot.

Features at a Glance

·         The corner guard pieces of body armor made by Body Armor come to you complete with the 3M tape that is automotive grade and double sided.  This is what you will use to attach the pieces to your Jeep

·         The corner guard body armor that is made by Body Armor comes to you in a black color

·         These body armor pieces are made from a very high tensile thermoplastic that has been given a UV treatment to allow it to be resistant to fading from the sun

·         This body armor is compatible with both 2 door Jeep models and 4 door models

·         These particular corner guards made by Body Armor have been made specifically for the Wrangler JK Unlimited as well as for the Rubicon Unlimited from 2007 – 2015 models

·         The corner guard pieces of body armor are so easy to install that from start to finish you can be done in less than 5 minutes

You can use these pieces to cover up imperfections in your paint job or just to protect it from getting scratched up while also giving your rig that off road look.

 

Body Armor Roof Rack Adapters

If you have a Jeep Wrangler 2007 – 2015 JK and a roof rack made by Body Armor then you might find a use for the roof rack adapters that they also make.  These roof rack adapters are sold in sets of two.  With these amazing adapters, you will have the ability to add some accessory cross bars on to your roof rack made by Body Armor.  These cross bars will then allow you to have the ability to add a variety of cargo accessories to the rack.  For example, you can add a bike rack to your rack if you wanted to.  All you need to do is just attach these roof rack adapters to your roof rack and then get some of the cargo cross bars made by Thule or Yakima to add and you will be all set.

Features at a Glance

·         Installation of these roof rack adapters does not involve any sort of drilling, welding or cutting.  That means that installation is quick and easy.

·         If you are going to use Thule accessories then you will also need to get the tracker II kit as well as  the foot pack

·         If you are going to use Yakima accessories then you will also need to get the landing pad and the control towers

·         That said, with the roof rack adapters made by Body Armor, you will be able to also use cross bars as well as accessories made by Yakima and/or Thule

·         Adapters will work along with any tube that has a diameter measuring 2 inches.  That includes some truck bed rails and even some roof racks made by other manufacturers

·         Adapters are incredibly versatile and can be placed anywhere along the sides of your Body Armor roof rack

·         These adapters are quite unique in that they were designed to be able to be used on nearly any tube that has a 2 inch diameter.  This includes any of the tubes on the base of the roof racks made by Body Armor

·         You will find these adapters come in pairs

·         The adapters have a 2 piece design and they will fit around the tubes where ever you need to place them

No arsenal of aftermarket roof rack products is complete without these roof rack adapters.  With these in your possession, you will have the ability to add all of the roof rack accessories that you need.  This includes bars for cargo boxes, canoe racks and even bike racks.  In addition, these are not just for Jeeps.  Any vehicle that can support a roof rack made by Body Armor can benefit from these adapters.

They are so easy to use too, just clamp them around the tubes and you are ready to upgrade your roof rack!

 

Swing Arm for Body Armor Rear Bumpers

Serious off road drivers know that they need to make sure their Jeeps are equipped with the proper gear before they hit the trails.  Things like a spare tire, extra gas and a winch are no brainers for these people.  That’s because they know that they run the risk of getting stuck miles away from help – or even a cell signal to call for help.  However, when you have one of the bumpers made by Body Armor you will have the ability to be prepared for anything that might come your way.

Body Armor knows the off road like they know the backs of their hands.  Their bumpers can be found on the roughest and toughest trail blazers, dune surfers and rock crawlers in the world.  It doesn’t matter if you are getting ready to cross the Ozarks or surf across the MOAB, the Body Armor bumper is one thing you will not want to leave at home.

Rear Bumpers and Swing Arms

When you are entering unchartered territory while driving your Jeep, the chances are that you will find yourself in a sticky situation.  Since you won’t leave the trail without your Jeep, you will have to have a way to get it out of whatever sticky situation you put it in.  This is where a Body Armor rear bumper comes in handy.  This is the bumper you need to give you a solid anchor to reel your rig in.

This bumper has been designed specifically for intrepid rock crawlers.  It has been made from a 2 inch by 5 inch rectangular tube of steel.  The Swing-Away models have heavy duty shackles welded into place that connect to a set of D rings.  Additionally, there is a 2 inch receiver hitch that comes on the models meant for Jeep TJ, YJ and CJ.  This is perfect for those recoveries in reverse.

 For off road versatility that is unparalleled you can upgrade the basic bumper with the Swing Away package.  This package includes not just a swing away tire carrier but also a mount for your Hi Lift jack, a mount for your J-can and a mount for your CB antenna.  All of this just swings out of your way when you want access to your rear cargo area.

Features at a Glance

·         Comes to you complete with a warranty against any type of manufacturer defects

·         Powder coated finish in black gives it a sharp look as well as protection against corrosion and rust

·         Swing Away arm (optional) can add not only a spare tire carrier but also mounts for your J-can, Hi Lift jack and CB antenna

·         Installs with ease and all of the hardware necessary for installation is included with your purchase

Body Armor Trail Doors

Most of the time, people will buy a Jeep because of the innate ability of a Jeep to conquer the off road.  However, in order to be able to do that safely, you need to have the Jeep equipped properly.  Some of this equipment may be considered common sense…extra fuel, a winch and a spare tire for example.  However, you will also need to get a good set of what are considered to be trail doors. 

Body Armor knows what it takes to be off road just as well as any other Jeeper does.  Why?  Every employee at Body Armor is an off road warrior themselves.  They will not make and sell any piece of equipment that they would not put on their own Jeeps.  

Recon

Body Armor makes a set of doors that they call Recon trail doors.  These doors have a unique design that includes what are known as speed gusset plates.  These doors also have a system of dual position hidden latches that are a Body Armor exclusive feature.  The latch systems ensure that you get a positive latch that is secure and is easy to operate whether you are outside or inside the Jeep. 

The Recon trail doors also have inserts made from nylon webbing that will add to the amount of protection that you get from the debris of the trail while they also increase the amount of visibility that you have.  Body Armor didn’t forget the limiting straps either.  These straps are crucial when it comes to keeping your doors opening only to the desired amount.  If you want to install mirrors on these doors, there are holes already drilled into the doors for that reason.  The doors themselves are constructed from steel tubing and have been given a durable black powder coat although you can also get them in bare steel if you like.

Installation is an easy thing.  Just take off your existing doors and put these doors right on the factory hinges.  There are no modifications necessary at all. 

Sold in pairs, these doors come with a 60 warranty for the finish.

Features at a Glance

·         Designed to fit most Jeeps

·         Includes a 60 day warranty on the powder coat finish

·         Great for those who need secure closure.  The hidden internal latch is easily operated from bot outside and inside the Jeep

·         Front doors are sold as a pair

·         Rear doors are sold singly

·         Style and security is added to the doors with the integrated gusset plates made from steel

·         Installation is easy and can be completed quickly

·         Doors include inserts made from nylon webbing

·         Doors are constructed from steel tubing

·         With these doors, you will be enhancing the amount of trail visibility that you have